.jpg) Molecular Formula:(NH4PO3)n
Appearance : White powder
Cas No.68333-79-9
Specifications:
| P (%) |
21±1 |
| N (%) |
12.5±1 |
| Density (g/cm3) |
approx. 1.8 |
| Bulk Density (g/cm3 ): |
approx. 0.4 |
| Decomposition temperature |
220℃ min |
| Water / Moisture % |
approx.0.5 |
| PH |
5.0~7.5 |
| Average Particle size |
16um max |
XAP-02 is a non-halogenated flame retardant based on APP-1 as main component, which develops its effectiveness through phosphorus/nitrogen synergism. In contrast to similar competitive material, it shows high processing stability. XAP-02 differs in its mode of action from non phosphorus-based flame retardants by achieving its effect through intumescence. Material containing XAP-02 will foam on exposure to flame. The carbon-rich foam layer so formed will protect the polymer and in many cases the substrate below through its heat-insulating effect, reduces further oxygen access and prevents dripping in case of a thermoplastic based formulation. Secondary effects of fire Beyond the primary effects on fire behavior such as reduction of flame propagation rate, rate of heat release, dripping behavior, residual lengths of test specimens after flame tests etc., positive secondary fire effects such as low smoke density, no release of corrosive off-gases, lower formation of toxic smoke gases are of great interest.
Applications
XAP-02 is particularly effective in thermoplastic polyolefins (e. g. polyolefin hotmelts), urethanes (e. g. integral skin foams, rigid foams, sealants) and epoxy resins (adhesives, sealants, structural laminates, gelcoats). For epoxy resins used in Electrical/Electronics application.
|
